You might be wondering exactly why your thermostat is not connecting to WIFI and what you can do about it. Don’t worry. We will cover tips for how to check your connection and give you steps on how to reset the thermostat.
The first step to take when trying to figure out why your thermostat is not connecting to WIFI is to make sure that you are trying to connect it properly. You will connect it to WIFI using the Alexa app.
Try the following steps:
If you were trying to connect to WIFI directly from the thermostat or in another way, it would not work. The only way to connect the thermostat to your network is to use the Alexa app.
Check Your WIFI Network
If you tried to connect using the app and you get an error message or a message saying that the WIFI network cannot be found, the problem is probably with your WIFI network itself and not the thermostat.
If you have determined that your network is the problem, start by checking your WIFI box:
- Make sure the box is on. Many boxes have lights to show that they are on and connected. If any of these lights are flashing, the connection is probably weak or not stable. Check other devices you use with the WIFI to see if they are connected to the network or if they are also experiencing connection problems. Make sure the router has cables in good condition and none of them are fraying or damaged.
Now, let’s take a look at how to troubleshoot your WIFI.
Troubleshoot Your WIFI
You can also try the following troubleshooting tips:
- Unplug the router for 30 seconds and plug it back in. Press the reset button on your router until it turns off. Replace any damaged cables. Call your network service company and ask if there is an outage in the area. Call your network company’s support and ask them to troubleshoot your router.
Once the router has been fixed, try connecting through the Alexa app again and see if it works.
If your WIFI is working on other devices, but will not connect to the thermostat, you need to restart the thermostat as it will fix the most common problems.
Here’s how:
- Gently remove the faceplate from the wall. Wait a few seconds. Reattach the faceplate.
Allow a few minutes for the thermostat to restart. Go back into the Alexa app and try to connect to the WIFI again.
Resetting the thermostat is simple and can be done in just a few seconds.
- Press the Up Temperature, Down Temperature, and Mode buttons at the same time for 10 seconds. Wait until the message rEs appears on the display. Press and hold the Mode button for 5 seconds.
The thermostat should turn off and then turn back on once it has reset. Keep in mind that this erases all your data and you will have to set up the thermostat in the Alexa app again.
